CLI Token

To record the test executions executed by vrest-ng-cli utility, you will need to generate the CLI token to be used in the vrest-ng-cli utility.

Generate CLI Token

To generate the CLI Token, simply follow the steps below:

  1. Visit Configuration >> CLI Token from the left side menu bar in vREST NG Dashboard page.
  2. Click on Generate CLI Token button to generate the CLI Token.
  3. That's it.

Use of CLI Token

You may use this generated CLI Token in the vrest-ng-cli command to record the test run results in vREST NG Dashboard Service.

vrest-ng-cli run --record="true" --token="<TOKEN>" ...

For detailed instructions on vrest-ng-cli utility, you may look at our CLI guide on Executing Test Cases.

Remove CLI Token

To remove the CLI Token, simply follow the steps below:

  1. Visit Configuration >> CLI Token from the left side menu bar in vREST NG Dashboard page.
  2. Click on Remove CLI Token button to remove the generated CLI Token.
  3. Once token is removed then it cannot be used by vrest-ng-cli utility.